Clean face. Every surface.

Core product — available now

Flat, smooth metal panels for wall cladding, soffits, canopies, and interior liner applications. Concealed fastener system, V-groove option available, in 12″ and 16″ coverage widths.

Built for the job.

Every profile we make is roll-formed on-demand to your exact run length — no field cuts, no waste. Paired with our colour-matched trim and accessories, it ships as a complete system.

Full specs.

Flush panels are a flat-face concealed fastener profile — no exposed ribs, no visible hardware. The result is a smooth, modern surface that works equally well on building exteriors, overhangs, and interior liner applications.

All specifications subject to confirmation at time of order. Custom dimensions and gauges available — contact us to discuss your project requirements.

Coverage widths

12" & 16"

Face profile

Flat / flush

V-groove option

Available

Fastener system

Concealed

Applications

Wall, soffit, canopy, liner

Steel gauge

24ga & 26ga

Max panel length

Over 40 ft available if requested

Colours available

40+

Where it's used.

This profile is suited to a wide range of building types and project scales — from residential to large commercial.

Exterior wall cladding

Flush panels are increasingly popular for contemporary commercial and residential exteriors — clean horizontal or vertical lines with no visible fasteners. Works on both new construction and re-cladding over existing substrates with a strapping system.

Soffit & canopy panels

The flat face and concealed fastener system make flush panels ideal for soffits, overhangs, and canopy undersides. Available with perforation patterns for ventilated soffit applications — ask us about vented options.

Interior liner panels

For wash bays, agricultural buildings, cold storage, and industrial interiors, flush panels provide a smooth, washable wall and ceiling surface. The interlocking design eliminates gaps and the steel surface is moisture-resistant and easy to maintain.

How it goes on.

A simplified overview — for full installation guides, technical drawings, and spec sheets, contact our team or request a trade account.

Framing & substrate

Install strapping or Z-channel at the specified spacing for the coverage width you’re using. Ensure all framing is plumb and level — flush panels will telegraph any irregularities in the substrate.

Starter strip

Install the starter trim at the base of the wall or the inside edge of the soffit. This sets the alignment for all subsequent panels and provides a clean finished edge.

Panel installation

Hook each panel onto the previous panel’s concealed lock, fastening through the hidden flange. Work horizontally or vertically depending on your orientation. Panels can be cut to length on-site with standard metal cutting tools.

Trim & terminations

Finish all edges, corners, and penetrations with colour-matched brake-formed trim. J-channel, Z-channel, inside and outside corners are all available to order with your panel package.

FAQs.

What's the V-groove option?

A V-groove is a pressed line running the length of the panel face, adding a shadow line and visual depth to an otherwise flat panel. It’s a popular choice for contemporary residential cladding where architects want a flat panel with subtle articulation. V-groove is available on both 12″ and 16″ coverage widths.

Can flush panels be installed vertically?

Yes — flush panels run in whichever direction your framing allows. Vertical installation is common for barn-style residential cladding and modern commercial buildings. The clip and lock system works the same in both orientations.

Are flush panels suitable for exterior use in Alberta's climate?

Absolutely. The Kynar 500 PVDF coating on all our steel panels is rated for Alberta’s UV exposure, temperature range, and freeze-thaw cycles. The concealed fastener system eliminates the exposed screws that can loosen and leak over time on corrugated and ribbed profiles.

Can I order flush panels for both the roof and the walls of a building?

No — flush panels are designed for wall and cladding applications only and aren’t suitable for roofing. If you’re looking to match your roof and walls, we offer other panel profiles that work for both

Order Flush Panels panels.

Send us your cut list and we’ll quote within 24 hours. Roll-formed in Edmonton, ready for your project schedule.